General
|
Length |
120” (3.04m) |
| Width (O.A.) |
54” (1.37m) |
| Height (O.A.) |
48” (1.21m) |
| Weight (dry) approx |
3000 lbs. (1360 kg) |
| Propulsion |
Skid steered rubber cleat track drive variable from 0-60 fpm (0-18mpm) |
| Cutterhead |
Auger Type with Shroud |
| Width |
(outside to outside) 54” (1.68m) |
| Speed |
Variable to 50 RPM |
| Cutter Torque |
3,000 in.-lb. |
| Pumps |
HG XR4-11 (4” solids handling capability) |
| Impeller Size |
(centrifugal open) 11” in (279mm) |
| Speed |
1800 RPM Max. |
| Flow |
GPM 400(1.5m3h) Max. Head (ft): 130 (39m) |
| Discharge Size |
4” in (1219mm) |
Hydraulic
System |
Track Drive |
Per side
4 gpm (15 lps)
|
| Cutterhead |
6 gpm (22lps)
|
| Hydraulic flow |
GPM @ 2500 psi 18(68lps) |
| Pressure relief setting |
Psi 3000 (206 bars) |
| Reservoir size |
Gallons 25(94 liters) Pressure compensated, piston hydraulic pump
Electronic proportional control valve |
| Functions |
Left Track |
Forward/Reverse Speed |
| Right Track |
Forward/Reverse Speed |
| Slurry Pump |
On/Off |
| Auger |
On/Off Auger Up/Down |
| Electrical System |
Slurry Pump |
40 hp 480vac 3 phase 60 Hz |
| Hydraulic Power Pack |
10 hp 480vac 3 phase 60 Hz Other- 12vdc |
| Construction |
Unit may be optionally fabricated with Stainless Steel and other spark resistant materials. |
