|
Optional
Pump Dynamics - Electric Submersible Open/Closed Designs -
Application Based Pump Design
Physical:
Maximum Working Depth,
feet 15’
Operational Draft 16”
Flotation –Foam filled cylindrical pontoons
30”Wx37”D x 20’-0” O.A.L. x 10 gauge steel
Length, Overall 23’-1”
Transport Width 7’-6”
Transport Weight 7,800 Lbs
Height 6’-10”
Power:
460 V, 3 Phases, 60 Hz
Electric Power
Submersible Pump Motor -- 40 HP
Hydraulic System Motor – 10 HP, TEFC
System Controls:
Radio remote control
system
Slurry pump off/on
Auger off/on
Travel forward/off/reverse
Travel speed
Hoist up/off/down
Auger
Head:
Welded Steel Construction with dual drive hydraulic motors
Length, Overall…8’
Propulsion:
Hydraulic power Treble Sheave endless winch
Hoist:
Hydraulic power winch
3/8” stainless steel wire rope
Hydraulics:
Three Circuits – Auger-Cutter, Traverse Winch and Hoist
Winch
Coating System:
All metal surfaces shall be sand blasted and Painted with
Epoxy
|
Example
- Slurry Pump:
Goulds Model JCU 6X6 Pump Submersible Motor
Centrifugal, Solids handling Impeller
Basic Construction – Cast Iron
1500GPM @ 70 ft head (water)
Shutoff head 100 ft head (water)
Suction & Discharge Diameters – 6-Inches
Sphere size, inches (max) 6”
|
|
Liquid
Waste Technology is an innovative leader in the design and
manufacture of sludge handling equipment including Auger
Dredges, Lagoon Pumpers, Submersible Chopper Pumps, Prop
Agitators and Subsurface Land Disposal Systems. Call
1-800-243-1406, 715-246-2888 Ext. 18, e-mail at
sales@lwtpithog.com
or for more information, on the internet at
www.lwtpithog.com or write to LWT, Inc.,
PO
,
Somerset
,
WI
54025
|
|